www.longer3d.com 23 info@longer3d.com
Scale: select the model and scale icon, input scaling factor or
size number in the blank. Or hold down the mouse wheel and
scroll up and down. The size of model will change along XYZ
axis by equal scale.
Clone: make a copy of the selected model.
Reset: recover to the original status.
Maximize: change the model size to max within building volume.
6.7 Fix
Fix: check out the error(s) of the selected model, such as holes,
non-manifold, and click Fix to auto-repair the errors.
6.8 Support
Support: Select the model, click support icon, edit the
parameters, click Generate icon.
To Next Page
Loading...
