www.longer3d.com 37 info@longer3d.com
8. Attentions and Maintenance
1) Must wear latex gloves each operation.
2) The photopolymer resin must be kept out reach of children.
3) Before each printing, make sure that there is no solid residue on the platform or in the resin vat.
4) Do not use sharp object to scrape the release film of resin vat.
5) Hold the building platform when tighten and loosen it.
6) Keep the printer cover closed during usage.
7) Clean up the resin vat before the change of a new kind resin.
8) Keep the building platform and printer clean and wipe off the residual resin timely.
9) The photopolymer resin needs filtration after long time use or in the case of failed printing.
10) Please filter the resin and pour it in resin bottle, store it in a dark, dry place.
11) Do not pour the resin into domestic sewage, please contact professional for treatment.
12) Wash hands after each printing operation.
To Previous Page
Loading...
