Find your Device ID
Record your information below:
DEVICE ID:
Quick
Reference
Default access information:
• Default user name: admin
• Default password: 000000
Default system ports:
• HTTP Port: 80
• Client Port: 9000
Information in this document is subject to change without notice. As our products are subject
to continuous improvement, Lorex Corporation and our subsidiaries reserve the right to
modify product design, specifications and prices, without notice and without incurring any
obligation. E&OE © 2014 LOREX. All rights reserved.
www.lorextechnology.com
It’s all on the Web
Need Help?
Visit www.lorextechnology.com/support
Lorex Eco Stratus Series Quick Network Guide - English - R3
If you have forgotten your
password, contact
Lorex technical support.
2
b
Download the Client Software for PC from lorex.ca/LH160.
a
Once installation is finished, double-click the Lorex Stratus
Client 1 icon ( ) on the desktop. The DVR login appears.
Click Login. If this is the first time
connecting to your system, you
will be prompted to change the
password. Enter a new 6 character
password and click OK.
d
Enter the new password in the login
screen and click Login to connect
to the DVR. The Client Software
connects to your DVR and streams
live video from your cameras.
e
c
1
2
3
4
5
1
Select Device ID
2
Enter the DVR’s
Device ID
3
Enter the DVR’s
user name
(default: admin)
4
Enter the DVR’s
password
(default: 000000)
5
Enter the Client Port
(default: 9000)
Enter the following information:
3
PC Users
b
a
c
Mac Users
Visit lorex.ca/LH160 and download the Client
Software for Mac.
Extract the installer file and double-click it to install.
Open the Lorex Stratus Client 1 ( ) from the
Applications list.
d
e
g
h
1
2
3
4
5
1
Select Device ID
2
Enter the DVR’s
Device ID
3
Enter the DVR’s
user name
(default: admin)
4
Enter the DVR’s
password
(default: 000000)
5
Enter the Client Port
(default: 9000)
Enter the following information:
Click Login. If this is the first time connecting to
your system, you will be prompted to change the
password. Enter a new 6 character password and
click OK.
Enter the new password in the login screen and
click Login to connect to the DVR.
Quick PC/MAC Guide
OR
Congratulations! You can now
connect over the Internet to view
and playback video on your PC.
Congratulations! You can now connect
over the Internet to view and playback video
on your Mac computer.
Open Safari, then click Safari Quit Safari.
This resets Safari to complete the installation.
• • • • • •
• • • • • •
15 Minutes
The Device ID is printed on a label on the top panel of the DVR.
See the label on top of
your DVR for your
Device ID.
NOTE: PC/Mac setup is
not required to connect on
a smartphone or tablet.
See reverse for
smartphone/tablet setup.
Software and complete instruction
manual available on:
Device ID: xxxxxxxxxxx
To Previous Page
Loading...
Need help?
General