Lorex LH040 ECO SERIES - User Manual

Lorex LH040 ECO SERIES

176 pages

To Next Page

To Next Page

Loading...

Instruction Manual

LH040 ECO SERIES

Table of Contents

Default Chapter5
- Table of Contents5
1 Important Safeguards11
- General Precautions11
- Installation11
- Service13
- Use13
2 Features14
3 Getting Started (LH040 Series)15
4 Front Panel (LH040 Series)16
5 Rear Panel (LH040 Series)17
6 Basic Setup (LH040 Series)18
- Step 1: Connect the DVR Docking Stand (OPTIONAL)18
- Step 2: Connect the Octopus Cable18
- Step 3: Connect the Mouse19
- Step 4: Connect the Ethernet Cable19
- Step 5: Connect the Monitor20
- Step 6: Connect the Power Adapter and Power on the DVR20
- Step 7: Upgrade Firmware to Latest Version (if Available)20
- Step 8: Verify Camera Image21
- Step 9: Set the Time21
- Default System Password & Port Numbers21
  - Lorex Stratus Connectivity22
- Quick Access to System Information22
- Connecting Cameras22
7 Mouse Control25
8 Remote Control26
9 Using the On-Screen Display28
- Using the Menu Bar28
- Using the Virtual Keyboard and Mini-Keyboard29
- Using the Zoom Mode30
- Using Picture in Picture (PIP) Mode30
10 Setting the Date and Time32
- Configuring Daylight Savings Time (DST)32
- Using a NTP Server to Set Your System Time33
11 Recording35
- Recording Audio35
12 Playback36
- Playing Back Recorded Video36
- Quick Playback40
13 Backup42
- Backing up Video42
- Using Video Clip Backup43
- Viewing Backed up Video44
14 Managing Passwords45
- Changing Passwords45
- Adding Users46
15 Using the Main Menu49
- Display50
- Record56
- Search60
  - Using the Event Search60
  - Using the Log Search61
- Network62
- Alarm66
  - Configuring Motion Detection66
  - Configuring Alarm Settings67
- Device69
- System71
- Advanced73
16 Connecting to Your DVR over the Internet on PC or Mac79
- System Requirements79
- Step 1 of 3: Connect Your DVR to Your Router79
- Step 2 of 3: Obtain the Dvr's Device ID80
- Step 3 of 3: Connect to the DVR over the Internet81
17 Using the Pc/Mac Client Software84
- Changing Viewing Modes85
- Taking Screen Shots85
- Recording Video85
- Showing / Hiding Channels86
- Viewing the Bit Rate86
- Changing the Save Directory of Screenshots or Recorded Video87
- Changing the Format of Recorded Video (PC Only)87
- Configuring PTZ Settings88
- Video Playback89
  - Video Playback Controls91
- Configuring Display Settings92
- Configuring Privacy Zone Settings92
- Configuring Recording Parameters93
- Configuring the Recording Schedule93
- Configuring System Recording Quality94
- Configuring Basic Network Settings95
- Configuring the System Substream95
- Configuring Email Notification Settings96
- Configuring DDNS Settings97
- Configuring Motion Detection Settings98
- Configuring Your System to "Beep" During Motion99
- Configuring Alarm Notifications99
- Configuring Hard Drive Recording Mode100
- Configuring PTZ Parameters100
- Configuring the System Time and Date101
- Changing the System's Menu Time out102
- Configuring System User Accounts102
- Viewing System Information103
- Configuring Firmware Upgrades103
- Manually Upgrading System Firmware103
- Restoring Default Settings104
- To Upgrade System Firmware104
- Configuring Event Settings105
18 Mobile Apps: Accessing Your DVR Using a Mobile Device106
- Supported Apps and Platforms106
- Iphone106
- Ipad115
- Android125
19 Lorex Player 11: Playing Backed up Video on PC136
- Running Lorex Player 11136
- Lorex Player 11 Interface Overview137
  - About the Advanced Config Menu137
- Converting Backed up Video to AVI Files138
20 Lorex Player for Mac: Viewing Backed up Video on Mac140
- Opening Individual Video Files140
- Loading Multiple Video Files140
- Lorex Player for Mac Interface141
21 Connecting a PTZ Camera142
- Configuring PTZ Settings142
- Using the PTZ Menu (Local DVR)143
- PTZ Presets and PTZ Cruise144
22 Connecting Additional External Monitors146
- Connecting the DVR to TV RCA Ports146
- Customizing the Channel Arrangement on the External Monitor146
23 Recording Audio148
24 Replacing the Hard Drive150
- Removing the Hard Drive150
- Installing the Hard Drive152
- Formatting the Hard Drive155
25 DDNS Setup (Advanced)157
- Accessing Your DVR Within a Local Network (LAN)157
- DDNS Setup-Access Your DVR Remotely over the Internet160
26 Troubleshooting168
27 LH040 Series System Specifications171
28 Notices174
- FCC/IC Notice174
- Modification174
- Rohs174

Other manuals for Lorex LH040 ECO SERIES

Quick Start Guide2 pages

Questions and Answers:

N
Nicholas MillerAug 1, 2025
What to do if my Lorex LH040 ECO is not powering up?
- K
  Karen MckinneyAug 1, 2025
  If your Lorex DVR is not powering up, ensure that all cables are connected correctly, especially the power adapter at the back of the unit. If you have a power switch, make sure it is in the ON position. Also, confirm that the system is powered on by checking the LED indicators on the front. If connected through a power bar or surge protector, try connecting the power cable directly to the wall outlet. Finally, test the outlet with another device or try another outlet to ensure it's providing power.
K
Kimberly ShannonAug 9, 2025
How to fix a Lorex LH040 ECO when the hard drive is full and not recording?
- B
  Brandi BellAug 9, 2025
  If your Lorex DVR's hard drive is full and it's no longer recording, the 'Overwrite' function may not be enabled. To resolve this, go to the Main Menu, select DEVICE>HDD, choose 'Auto' under 'Overwrite', and then click 'Apply'.
K
kaylaclarkAug 16, 2025
What to do if the hard drive is not detected by the Lorex LH040 ECO DVR system?
- C
  Charles FitzgeraldAug 16, 2025
  If the hard drive is not detected by your Lorex DVR system, first, remove the housing and check that the hard drive cables are firmly connected. If there is no hard drive, open the housing and install a compatible hard drive.
C
carl30Aug 25, 2025
Why is my Lorex LH040 ECO remote control not working?
- J
  Jeffrey SmithAug 25, 2025
  If your Lorex DVR remote control is not working, the battery may be drained, or there may be no batteries installed. Install two fresh AAA alkaline batteries in the remote control.

Lorex LH040 ECO SERIES Specifications

General

Video Input	4 Channels
Recording Resolution	Up to 1080p
Compression Format	H.264
Power Supply	12V DC
Motion Detection	Yes
Video Output	HDMI, VGA
Network Interface	Ethernet
Remote Viewing	Yes
Operating Temperature	14°F to 131°F (-10°C to 55°C)
Storage Capacity	Up to 6TB

Summary

Important Safeguards and Precautions

General Safety Precautions

Safety guidelines for operating and using the product, including electrical safety.

Installation Safety Instructions

Instructions and safety considerations for product installation.

Getting Started with LH040 Series

Included System Components

List of components included in the LH040 Series system package.

Basic Setup Procedures

Firmware Upgrade Process

Default System Password and Port Numbers

Default login credentials and network port numbers for the DVR.

Connecting Cameras to DVR

Using the Main Menu and DVR Settings

Display Settings Configuration

Recording Settings Configuration

How to configure recording schedules, quality, and audio recording.

Searching Recorded Video and Logs

How to search for recorded video by event or system logs.

Network Settings Configuration

How to configure network settings, email notifications, and DDNS.

Alarm and Motion Detection Settings

How to configure motion detection areas, sensitivity, and alarm actions.

Device Settings and Formatting

System Time and User Account Settings

Advanced System Configuration

Connecting to DVR Over Internet (PC;Mac)

PC;Mac Client System Requirements

Connecting DVR to Router

Instructions for connecting the DVR to a router via Ethernet cable.

Obtaining DVRs Device ID

How to find the DVR's unique Device ID for internet connection.

Connecting to DVR via Internet

Steps to connect to the DVR remotely using PC/Mac client software.

Using PC;Mac Client Software

Video Playback Controls in Client

Configuring Recording Parameters

Configuring Recording Schedule

Configuring System Recording Quality

How to set recording quality, resolution, and framerate for channels.

Configuring Basic Network Settings

How to configure basic network settings like DHCP or Static IP.

Configuring Email Notification Settings

Configuring DDNS Settings

Configuring Motion Detection Settings

How to configure motion detection settings via the client software.

Restoring Default Settings via Client

How to restore factory default settings via the client software.

Mobile Apps: Accessing DVR on Mobile Devices

iPhone App Connection and Interface

Steps to connect an iPhone to the DVR using the Lorex Eco Stratus app.

iPad App Connection and Interface

Steps to connect an iPad to the DVR using the Lorex Eco Stratus HD app.

Android App Connection and Interface

Steps to connect an Android device to the DVR using the Lorex Eco Stratus app.

Using Lorex Player for Video Playback

Lorex Player 11 (PC) Setup and Interface

How to run Lorex Player 11, its interface, and convert files to AVI.

Lorex Player for Mac Setup and Interface

How to install and use Lorex Player for Mac for video playback.

Replacing and Formatting the Hard Drive

Removing the Hard Drive

Installing the Hard Drive

Formatting the Hard Drive

DDNS Setup and Remote Access

Accessing DVR via Local Network (LAN)

Connecting to DVR via Local IP Address

Port Forwarding for Remote Connectivity

Creating a DDNS Account

Enabling DDNS on the DVR

Connecting to DVR via DDNS Address

How to connect to the DVR using its DDNS address.

Troubleshooting Common Issues

LH040 Series System Specifications

Related product manuals

Preview: Lorex LH030 ECO BLACKBOX3 SERIES

Lorex LH030 ECO BLACKBOX3 SERIES

Preview: Lorex ECO LH100 SERIES

Lorex ECO LH100 SERIES

Preview: Lorex ECO 2

Lorex ECO Series

Preview: Lorex LH060 Series

Lorex LH060 Series

Preview: Lorex LH314

Preview: Lorex LH158

Preview: Lorex LHB926 Series

Lorex LHB926 Series

Preview: Lorex LHV1000 SERIES

Lorex LHV1000 SERIES

Preview: Lorex LHV5100 Series

Lorex LHV5100 Series

Preview: Lorex LH150 ECO4 SERIES

Lorex LH150 ECO4 SERIES