Using the Main Menu15
4. Perform one of the following:
• Play video: Double-click on the desired file.
• Back up a file: Connect a blank USB flash drive to your system. Select the BAK
checkbox beside the desired file name. Then, click the Backup button.
15.3.2 Using the Log Search
A log search allows you to search system event logs.
To perform a Log search:
1. Click the Log tab.
2. Configure the following to perform a Log search:
• Log Type: Select the log type you wish to search under. Choose from Alarm (i.e.
motion events), Operation (i.e. Configuration changes, Setup), or All.
• Start Time: Enter the time you wish to begin searching.
• End Time: Enter the time you wish to end searching.
3. Click Search.
4. (Optional) Click the Backup button to backup system logs to a USB flash drive (not
included).
#LX400015; r. 1.0/13705/13705; en-US
51
To Next Page
Loading...
