Connecting Additional External Monitors
22
4. Click Display>Output.
4.1. Under View Setup, select Enable. This lets you select and arrange the chan-
nels you want to show on the screen.
Note
Enabling View Setup disables your ability to change channels the normal way on the se-
lected monitor. You will need to disable View Setup to return to normal operation.
4.2. Under View Mode, select the desired viewing mode: Single, Quad, Nine (8/
16-channel models only), or Sixteen (16-channel models only).
4.3. Click Vout Setup. A menu appears that allows you to select the arrangement of
channels.
5. Click the drop-down menus to select which channels to show on the screen and the ar-
rangement of channels.
6. Click Apply to save changes. Click Ok. Right-click repeatedly to and return to live
viewing.
7. Press 0 on the remote control 3 times to restore the system interface to the VGA/HDMI
monitor.
#LX400015; r. 1.0/13705/13705; en-US
137
To Next Page
Loading...
