Camera Setup
1. Turn the adjustment ring counter-clockwise to loosen
and reposition the camera.
2. Screw in the antenna.
3. Insert the power pack into the bottom of the camera.
Note: You will hear a ‘beep’ when the power pack is
properly inserted. If you do not hear this alert, remove
the power pack by pushing in on the battery release
tabs then re-insert.
Adjustment ring
5
L4248-Series_QSG_TRILINGUAL_R1.indd 9
L4248-Series_QSG_TRILINGUAL_R1.indd 9
2021-06-02 7:14:27 PM
To Next Page
Loading...
