Replacing the Hard Drive21
5. Secure the hard drive mounting brackets to the DVR housing using the 4 screws.
6. Hold the top panel of the DVR at an angle. Ensure the front panel of the DVR lines up
with the bottom panel. Lower the top panel onto the DVR.
7. Replace the screws on the rear panel (x3) of the cover.
21.3 Formatting the Hard Drive
If you replace the pre-installed hard drive, it must be formatted in order to function properly
with the system.
CAUTION
Formatting the HDD erases all data on the hard disk. This step cannot be undone.
#LX400066; r. 1.0/26388/26388; en-US
125
To Next Page
Loading...
