Lorex LH050 ECO SERIES - Setting the Remote Control ID

Using the Main Menu15
15.7.6 Setting the Remote Control ID
If you have more than one DVR, you can use the ID function to pair the remote control with
a specific DVR.
To pair the remote control:
1. On the DVR, right-click to open the menu bar and click
.
2. Enter the DVR user name (default: admin) and password (default: 000000).
3. Click System>Control Device.
4. Under System ID, enter the desired ID number.
5. Click Apply to save your settings. Right-click repeatedly to return to live view.
6. On the remote control press ID, then press the ID number you entered in step 4 and
press Enter to confirm.
NOTE
You do not need to enter 0’s in the ID for unused digits. For example, if the ID is "004," press
ID>4>Enter.
#LX400066; r. 1.0/26388/26388; en-US
55