86
Connecting to Your NVR Over the Internet on PC or Mac
6 Under Device ID, enter the Device ID printed on the top panel of your NVR.
Click Add
Enter a name for your NVR
Enter the Device ID
NOTE: If you have changed the Client Port, User Name, or Password from the defaults, you
must update them to connect to the NVR.
7 Click Ad
d.
8 If this is the firs
t time connecting to the system, you will be prompted to change the
password. Enter a new 6 character password and click Yes. This password will be used to
connect to your system from now on.
Enter a new password
Enter a new password
9 Click Next 3 times, then click Finished.
10 The NVR opens in Main View and
streams video from your cameras.
NOTE: If Main View does not open, click Contr
ol Panel>Main View to open the Main View menu.
Then drag the NVR folder to the display area.
To Next Page
Loading...
