Lorex LNR360 - User Manual

www.lorextechnology.com
NETWORK VIDEO SURVEILLANCE RECORDER
LNR300 netHD Series
Copyright © 2013 Lorex Technology Inc.
Instruction Manual
English Version 1.0
RETAIL
INDUSTRY
BUSINESS
BUSINESS HOME
OUTDOOR
C ONNECTIVITY

Lorex LNR360 Specifications

General

Model	LNR360
Video Resolution	1080p
Video Compression	H.264
Power Supply	12V DC
Video Outputs	1 × HDMI, 1 × VGA
Hard Drive Support	Up to 6TB
Remote Viewing	Yes
Audio Inputs/Outputs	1 RCA input, 1 RCA output
Network Interface	Ethernet
Operating Temperature	14°F to 131°F (-10°C to 55°C)
Audio Support	2-way audio

Summary

Important Safeguards and Precautions

General Safety Precautions

Covers essential safety guidelines for operating the product and accessory equipment.

Installation Safety Guidelines

Provides detailed instructions and safety considerations for installing the NVR and connected devices.

Service and Use Instructions

Servicing Procedures

Details on who should service the product and conditions requiring professional service.

Product Usage and Maintenance

Instructions for proper usage, cleaning, and maintenance of the NVR.

Notices and Compliance Information

FCC;IC, Modification, and RoHS Compliance

Contains FCC/IC compliance information, modification guidelines, and RoHS compliance details.

Product Features Overview

NVR and Connectivity Features

Highlights key features of the Network Video Recorder and its connectivity capabilities.

Core NVR Operations

Recording and Playback Management

Details on configuring recording modes, schedules, and viewing recorded video.

Camera and System Configuration

Camera Settings Management

Covers camera settings, including image adjustment, motion detection, and alarms.

System Configuration Options

System and network settings configuration, including display, mouse, network, and warning settings.

System Maintenance and Shutdown

Maintenance Procedures and Shutdown

Procedures for system information, log management, firmware upgrades, and system shutdown.

Client Software Management

Account and Device Management

Managing NVRs within the client software, including accounts, devices, and settings.

Remote Internet Access Setup

PC;Mac Connection Setup and Requirements

Steps for remote access via client software, including system requirements.

Troubleshooting Common Issues

Error Resolution and Solutions

Common NVR errors, their possible causes, and recommended solutions.

Getting Started Guide

System Components and Initial Setup

Overview of system components and initial setup procedures for the NVR.

NVR Overview and Connections

Front and Rear Panel Connections

Details the front panel and rear panel connections for 4/8-channel NVR models.

16-Channel Rear Panel Details

Details the rear panel connections specifically for the 16-channel NVR model.

Basic Setup Procedures

Initial Hardware Connections

Step-by-step guide for connecting the mouse, Ethernet, and monitor, and powering on the NVR.

IP Camera Connection Methods

Instructions for connecting IP cameras directly to the NVR or via a local network.

Initial Configuration Settings

Default Credentials and Stratus Connectivity

Information on default login credentials and cloud connectivity service for NVR access.

Camera Installation Best Practices

Optimal Camera Placement and Wiring

Provides guidance on optimal camera placement, wiring, and mounting for effective surveillance.

LAN Camera Connection Guide

Connecting Cameras via Local Area Network

Instructions for connecting IP cameras to the NVR via a LAN, including PoE switches or adapters.

NVR Navigation Controls

Mouse and Remote Control Usage

Explains how to use the NVR's USB mouse and remote control for system navigation.

On-Screen Display Features

Camera Toolbar, Zoom, and Image Settings

Guide to navigating menus and utilizing features like Camera Toolbar, Digital Zoom, and Image Settings.

Quick Menu and Virtual Keyboard Usage

Accessing playback controls via Quick Menu and using the virtual keyboard for input.

Date and Time Configuration

System Time, DST, and NTP Settings

Essential steps to accurately configure system time, DST, and NTP synchronization.

Recording Management

Recording Modes and Schedules

Details on system recording modes, icons, and default recording schedules.

Video Playback and Search

Playback Options and Search Methods

Options for viewing recorded video, including quick playback, all-day playback, and search.

Event, Tag Search, and File Locking

How to search for video by event/tag and protect files from overwriting.

Video Backup Procedures

USB Drive Formatting and Backup Methods

Procedures for backing up video footage to USB drives or external hard drives.

Video Clip Backup and Playback

Procedure to select and save specific durations of video clips during playback.

Backup File Playback Using Quick Player

Instructions on how to play back video files saved from the NVR.

Password and User Account Management

Password Protection and Admin Account

Steps to enable/disable password protection and change the admin account password.

Adding and Managing User Accounts

How to create new user accounts with specific permissions for system access.

System Navigation and Controls

Main Menu Overview

Overview of the main menu structure and access to various NVR functions.

Manual Recording and HDD Management

Manual Recording Configuration

Instructions for configuring manual recording options for individual cameras.

Hard Drive (HDD) Management

Guides on formatting hard drives, configuring drive types, and managing HDD settings.

Advanced HDD Settings and Overwrite

Configuration options for recording groups, HDD detection, and overwrite feature.

Recording Schedule and Setup

Configuring Recording Schedules

Steps to set up continuous, motion detection, or custom recording schedules for cameras.

Recording Setup Parameters

Details on configuring camera recording parameters like resolution, frame rate, and quality.

Pre;Post-Record and Substream Settings

How to set durations for recording before/after events and substream quality for streaming.

Holiday Recording Schedules

Procedure to configure special recording settings for holidays.

Camera Settings and Features

Camera Synchronization and OSD

Management of connected IP cameras, including synchronization and on-screen display settings.

Image Settings and Motion Detection

Adjusting image parameters and configuring motion detection settings for cameras.

Privacy Mask and Tamper-proof Alarms

How to block video areas with privacy masks and configure tamper-proof alarms.

Video Loss Alarm Configuration

Configuring alarms for when a camera's video signal is lost or disconnected.

Remote Access Setup via PC;Mac

Connecting to NVR Over the Internet

Detailed steps for remote access via client software, including system requirements.

NVR Network Connection Steps

Instructions for physically connecting the NVR to your network router via Ethernet.

Internet Connection Wizard

Guide to using the client software wizard to establish an internet connection to the NVR.

Client Software Interface and Operations

Control Panel and Main View Navigation

Overview of the client software's Control Panel and its main features.

Live View and Camera Monitoring

Accessing live video streams from IP cameras through the client software's main interface.

Playback and Video File Management

Viewing recorded video from cameras within the client software's main view.

Video Tagging and Downloading

Adding tags to video footage during playback for easier event marking and searching.

File and Recording Management

Viewing Manual Recordings and Downloads

Accessing and viewing all recorded video files, including manual recordings and downloads.

Screenshot and Video Player Usage

Viewing saved screenshots of camera feeds using the client software's Pictures option.

Video Player Operations

Instructions for opening and playing back backup video files using the client software.

Advanced Client Software Features

E-Map Configuration

Creating visual maps to represent camera locations and statuses for easy monitoring.

Event Search Functionality

Searching for recorded events, such as motion detection, within the NVR.

Event Search and Download Controls

Using the playback controls within the event search results for detailed viewing.

Downloading Event Video Files

Procedure to download event recordings directly to your computer's hard drive.

Remote Playback and Management

Remote Playback Operations

Viewing recorded video from the NVR remotely on your computer.

Remote Playback Controls and Downloads

Using the interface controls for remote playback of recorded video.

Downloading Video Files Remotely

Methods for downloading video files by file, duration, or tag using remote playback.

Client Software Camera Management

Adding and Grouping Cameras

Managing camera groups within the client software for organized monitoring.

Modifying and Deleting Cameras;Groups

Changing names of cameras or camera groups and deleting them.

Log and System Information Access

Local Log Search Functionality

Searching for system logs on the NVR to track events, operations, and warnings.

Holiday Scheduling Options

Marking specific days as holidays to apply special recording schedules.

Camera Settings Configuration

Image Settings and OSD Customization

Customizing camera names and on-screen display text, including position and format.

Video Quality and Recording Schedules

Configuring camera recording parameters like resolution, frame rate, and quality.

Advanced Recording Options

Setting pre-record, post-record times, and video retention durations.

Motion Detection and Tampering Alarms

Setting up motion detection sensitivity, areas, and alarm actions for cameras.

Video Loss Alarm Configuration

Configuring alarms for when a camera's video signal is lost or disconnected.

System Configuration Settings

General Client Software Settings

Setting parameters like screen switching interval, log keeping time, and network performance.

File Saving and Alarm Sound Options

Configuring default save folders for screenshots and video files within the client software.

Email and DDNS Configuration

Configuring outgoing email settings for alerts and notifications from the client software.

Mobile Device Access

iPhone Connectivity and Usage

Steps to connect to the NVR using the Lorex netHD Stratus app on an iPhone.

Android Phone Connectivity and Usage

Connecting to the NVR using the Lorex netHD Stratus app on an Android smartphone.

Android Tablet Connectivity and Usage

Connecting to the NVR using the Lorex netHD Stratus Plus app on an Android tablet.

Mobile Live View Interface

Navigating Live Camera Views and Screenshots

Navigating the live camera view on mobile devices, including taking screenshots.

Mobile Playback Operations

Playback on iPhone and Android Devices

Accessing and viewing recorded video from the NVR on mobile devices.

Device List Management

Managing NVR Connections on Mobile Devices

Managing NVR connection details, including modifying or deleting NVRs.

Mobile App Configuration

Local App Settings and Updates

Enabling password protection and checking for software updates for mobile applications.

Android Tablet System Requirements

Connecting to NVR via Android Tablet

Step-by-step guide to connecting the NVR to an Android tablet using the app.

Android Tablet Device List Management

Managing Tablet NVR Connections

Managing NVR connection details for Android tablets.

Appendix A: System Specifications

Detailed NVR Technical Specifications

Detailed technical specifications for the NVR system, including hardware and software features.

Appendix B: Hard Drive Installation

Hard Drive Installation and Removal

Comprehensive guide on installing and replacing the 3.5" SATA hard drive in the NVR.

Hard Drive Formatting Procedure

Instructions for formatting the hard drive to ensure proper functionality with the system.

Appendix C: DDNS Setup

Local Network (LAN) Connectivity Check

Steps to confirm NVR connectivity on the local network before Internet setup.

Remote Internet Access Setup

Prerequisites and steps to set up remote connectivity for viewing the NVR via Internet.

Appendix D: Web Browser Access

Connecting via DDNS or Local IP Address

How to use DDNS or local IP addresses to access the NVR via a web browser.

Browser-Specific Connection Steps

Steps to connect to the NVR using Internet Explorer, including plug-in installation.

Safari and Chrome;Firefox Connection

Steps to connect to the NVR using Safari, Chrome, or Firefox browsers.

Web Browser Interface Navigation

Overview of the web interface controls for live view, playback, and configuration.