38
Managing Passwords
Managing Passwords
ATTENTION: By default, the system user name is admin and the password is 000000. Passwords
are enabled by default and are required to access the Main Menu.
The password is required to log into the system remotely using a computer or mobile device. You
will be prompted to create a custom password after you connect for the first time.
When you first startup your system, you are technically logged in as the admin (system
administrator) account. The system supports the following account types:
• Admin—sys
t
em administrator: has full control of the system, and can change both
administrator and user passwords and enable/disable password protection.
• Operator—user
account: has limited access to the system. Access permissions for operator
accounts can be customized by the admin account.
For security reasons, it is essential to create your own custom password.
Enabling/Disabling Passwords
When passwords are enabled, the system will require passwords to access playback or
system menus.
To enable passwords:
1 Right-click and click Me
nu.
2 Enter the system user name (default: ad
min) and password (default: 000000) and click Yes.
3 Click Configur
ation.
4 Check En
able Password to require passwords to access system menus or uncheck to disable
passwords.
Check Enable Password to
require passwords or uncheck
to disable
5 Click Apply.
To Next Page
Loading...
Need help?
General