69
Configuration
4
Click to adjust the brightness
for the BNC monitor
Click inside CVBS Output Brightness to adjust the brightness of the BNC monitor.
5 Click A
pply to save changes. Right-click repeatedly to return to live view.
Changing the Device Name
The Device Name is the name of the system that appears in the System Information page.
You may create a custom Device Name of your choice.
To change the Device Name:
1 Right
-click and then click Menu.
2 Enter the system user name (default: ad
min) and password (default: 000000) and click Yes.
3 Click Configur
ation>More Settings.
4 Under Devic
e Name, enter a name for your NVR. This can be anything of your choice (e.g.
home, office, etc.).
Enter a name for your NVR
5 Click Apply to save changes. Right-click repeatedly to return to live view.
Network
Selecting Fixed IP or DHCP
The system is capable of operating in DHCP or fixed IP address modes.
To setup a fixed IP address or DHCP:
1 Right-click and then click Menu.
2 Enter the system user name (default: ad
min) and password (default: 000000) and click Yes.
3 Click Configur
ation>Network.
4 Check Enab
le DHCP to have the system automatically obtain an IP address from the router.
Un-check Enable DHCP to assign a fixed IP address.
To Next Page
Loading...
Need help?
General