Lorex LNR360 User Manual

72
Configuration
2 Enter the system user name (default: admin) and password (default: 000000) and click Yes.
3 Click Configur
ation>Network>DDNS.
4 Check Enab
le DDNS.
5 Configure the following:
• DDNS Type: Sel
ect LorexDDNS.
• Device Domain Name: Enter the Domain Name/URL
Request you received in the confirmation
email after you set up your DDNS account.
• User Name: Ent
er the DDNS User Name from the confirmation email.
• Password: En
ter the DDNS Device Password from the confirmation email.
Check to enable DDNS
Enter Domain Name/URL
Request
Enter DDNS User Name
Enter DDNS Device Password
6 Click Apply to save changes. Right-click repeatedly to return to live view.
Changing System Ports
The NVR’s default Client Port is 8000, the default HTTP Port is 80, and the default Mobile
Port is 1025.
To change system ports:
1 Right
-click and then click Menu.
2 Enter the system user name (default: ad
min) and password (default: 000000) and click Yes.
3 Click C
onfiguration>Network>More Settings.
4 Configure the Se
rver Port, HTTP Port, and Mobile Port as needed.
Enter Server port
Enter HTTP port
Enter Mobile port
5 Click Apply to save changes. Right-click repeatedly to return to live view.
NOTE: If you have completed router port forwarding, you will need to re-configure your router
t
o forward the newly selected ports.

Lorex LNR360 Specifications

General

Brand	Lorex
Model	LNR360
Category	DVR
Language	English