68
Configuration
3 Click Configuration.
4 Under Auto Logout, select the
amount of time menus will remain open while the system is
idle or select Never to disable auto logout.
Select the Auto Logout time
5 Click Apply to save changes. Right-click repeatedly to return to live view.
Pairing the Remote Control
The remote control comes pre-paired to your NVR. If you have more than one NVR, you can
pair the remote control to a specific NVR.
To pair the remote control to an NVR:
1 Right
-click and then click Menu
.
2 Enter the system user name (default: ad
min) and password (default: 000000) and click Yes.
3 Click Co
nfiguration>General>More Settings.
4 Click Devic
e No. and then enter a unique ID for your NVR.
Enter a unique ID
number for you NVR
5 Click Apply to save changes. Right-click repeatedly to return to live view.
6 On the remote control, press DEV. Then, pr
ess the number you selected in step 3 and press
Enter. Your remote control will now be paired with the NVR.
Adjusting BNC Video Out Brightness (16-Channel Only)
On the 16-channel model, you can adjust the brightness for a monitor connected to the
Video Out (BNC) port.
To adjust the video out brightness for the BNC monitor:
1 Right
-click and then click Menu
.
2 Enter the system user name (default: ad
min) and password (default: 000000) and click Yes.
3 Click Co
nfiguration>General>More Settings.
To Next Page
Loading...
Need help?
General