Lorex LNR360 User Manual

62
Camera
To configure privacy masks:
1 Right click and click Menu
.
2 Enter the system user name (default: ad
min) and password (default: 000000) and click Yes.
3 Click Came
ra>Privacy Mask.
4 Under Camera, sel
ect the camera you would like to configure.
5 Check Enab
le Privacy Mask to enable privacy masks or un-check to disable.
6 Click and drag on the image to add privacy masks. Y
ou can configure up to 4 privacy masks
per camera.
Check to enable privacy masks
Click and drag to add privacy mask areas
• Click the Clear buttons if you need to delete a privacy mask.
7 Click A
pply to save changes.
Tamper-proof
Configuring Tamper-proof Alarms
Tamper-proof alarms occur if an intruder attempts to tamper with the camera by covering
the lens.
To configure tamper-proof alarms
:
1 Right click and click Menu.
2 Enter the system user name (default: ad
min) and password (default: 000000) and click Yes.
3 Click Came
ra>Tamper-proof.
4 Under Camera, sel
ect the camera you would like to configure.
5 Check Enab
le Tamper-proof to enable tamper-proof alarms or un-check to disable.

Lorex LNR360 Specifications

General

Brand	Lorex
Model	LNR360
Category	DVR
Language	English