26
Playback
4 Under IP Camera, check the cameras you would like to search for footage. Check/un-check
IP Camera to select/deselect all cameras.
5 Configure the
Record Type, File Type, Start Time, and End Time as needed and click Search.
A list of files appears, based on your search.
6 Click
to lock/un-lock files. Locked files will not be overwritten when the internal hard
drive is full. Locked files are shown with a
Click to lock/un-lock files
.
7 Click Canc
el to exit. Changes are saved when exiting.
Event Search
The Event Search menu is used to search for video with motion recordings.
To search for video with motion recording e
nabled:
1 Right-click and then click Me
nu.
2 Enter the NVR’s user name (default: admin)
and password (default: 000000) and click OK.
3 Click Playback and
then Event.
4 Under Start Time, sel
ect the start time for your search. Click inside the field on the left and
use the calendar to select the start date. Click inside the field on the right and use the
buttons to adjust the start time for playback. Click outside the field to confirm the time.
5 Un
der End
Time, select the end time for your search in the same way that you selected the
Start Time.
To Next Page
Loading...
Need help?
General