18
Using the On-Screen Display
• Single Screen: Open a camera in full screen.
• Multi-Screen:
Select a split-screen layout.
• Previous Screen: Select the
previous channel or group of channels (e.g. if 2x2 Multi-Screen
is selected, click Previous Screen to see the next 4 channels).
• Next Screen: Select the next channel or group of channels.
• Start/Stop SEQ: Start/s
top Sequence Mode (NVR automatically changes channels every few
seconds.
• Start Recording: Sel
ect Continuous & Motion Record to start 24/7 continuous and motion
recording on all channels. Select Motion Detection Record to start 24/7 motion detection
recording on all channels.
• All-day Play
back: Open Playback Mode for the currently selected channel. For details, see
“Using All-day Playback” on page 23.
• Output Mode: Click to adjus
t the color output mode for your monitor. Select the color output
mode that looks best on your monitor: Standard, Bright, Gentle, or Vivid, and then click OK.
• Information: Cl
ick to access system information.
• Disable Beep: Disabl
es the system beep for alarms until the next alarm occurs.
Using the Virtual Keyboard
You can input numeric or text values using the on-screen virtual keyboard. You will need to
use the Virtual Keyboard when entering your User Name and Password.
To use the Virtual Keyboard:
1 Click on a
menu option the requires text input.
• The Virtual Keyboard opens.
Toggle uppercase /
lowercase
Space Confirm
Input
Enter special
characters
Backspace
2 Enter your text entry and then press Enter.
To Next Page
Loading...
Need help?
General