11
Connecting Cameras over the Local Network
4 Check the cameras you would like to add to the NVR and click Quick Add. Right-click
repeatedly to return to live view.
Check the cameras
Click Quick Add
NOTE: IP cameras connected to the local network may only be assigned to channels 9~16.
Connecting Cameras Over the Local Network on 4/8-Channel Models
(Advanced):
Because all the channels are assigned to the PoE ports on 4/8-channel NVRs, you cannot
add cameras to the NVR using the steps for 16-channel models. You must override the
settings for the PoE channels to connect cameras over the local network.
To connect cameras over the local ne
twor
k on 4/8-channel models:
1 Right-click and click Me
nu. Enter the NVR’s user name (default: admin) and password
(default: 000000) and click OK.
2 Click Came
ra.
3 Click Sear
ch. The NVR scans for IP cameras on your local network.
4 Write down the IP addresses of the camera(s) you would like to add.
Click Search
Write down the camera
IP address
To Next Page
Loading...
Need help?
General