35
Backing Up Video
5 Under IP Camera, check the cameras you would like to backup. Check/un-check IP Camera
to select/deselect all cameras.
6 Under Rec
ord Type, select the type of recordings to search for: Continuous & Motion, Motion,
Manual, or All.
7 Under Fil
e Type, select All, Unlocked, or Locked.
8 Under Start Time, sel
ect the time to start the backup.
9 Under End
Time, select the time to end the backup.
10 Click Search.
A list of videos appears based on your search criteria.
11 Check the file
s you would like to backup. Check/un-check at the top of the list to select/
deselect all files.
Check files to
select for backup
NOTE: You must have enough space on your USB drive to save all selected files. The total size
of the files selected appears below the list.
12 Click Export. Then, click Export, enter the
sys
tem password (default: 000000), and click OK.
Wait for the backup to complete.
Using Video Clip Backup
Video clip backup allows you to select a duration of video during playback mode and save
it to a USB flash drive (not included).
To use Video Clip Backup:
1 Insert a USB flash driv
e (not included) or USB external hard drive (not included) into one of
the USB ports on the NVR.
2 From live viewing, right-click and then click All-Day Playback
.
To Next Page
Loading...
Need help?
General