23
Playback
Playback
You can use the following options to view recorded video on the system.
Using Quick Playback
Quick Playback plays back footage from the last five minutes for the selected camera.
To use Quick Playback:
1 Click inside
the c
amera you would like to playback and click .
2 Quick Playback mode opens.
If you select Quick Playback from split-screen view, the other
channels on screen will remain in live view, so you can keep monitoring your other cameras
while accessing recorded footage.
NOTE: A mess
age appears on screen if no footage is available for the selected camera in the
last five minutes.
3 Use the Quick Playback
controls. When finished, click X to exit Quick Playback.
Using All-day Playback
All-Day Playback opens footage from the last 24-hours for the selected camera.
To use All-Day Playback:
1 Right-click inside the camera you would like to playback and then click All-da
y Playback.
Right-click inside the camera
you would like to playback and
click All-day Playback
2 Enter the NVR’s user name (default: admin) and password (default: 000000) and click OK.
Playback mode opens showing video for the previous 24 hours.
3 Use
the on-screen playback controls. For details, see “U
sing the On-Screen Playback
Controls” on page 29.
To Next Page
Loading...
Need help?
General