Need help?Do you have a question about the Lowara ecocirc PRO 15-1/65 and is the answer not in the manual?
Follow instructions to prevent personal injury and device damage.
Explains the pump's purpose and benefits for domestic hot water circulation.
Details physical dimensions for various ecocirc PRO models.
Pump's internal protection against high temperatures and dry operation.
Guidance on using O-ring and flat seals for motor replacement.
Graphical representation of the pump's performance characteristics.
Step-by-step guide for pump installation, including check valves.
Key safety rules for installation, avoiding explosion risks and improper liquids.
Procedure for safe electrical connection by authorized specialists, including mounting.
Initial steps: system flushing, filling, and air purging for pump operation.
Instructions for setting the pump's timer and control thermostat.
Steps for pump maintenance, disassembly, and checking for wear.
Understanding LED error codes for pump malfunction detection.
Problem-cause-solution table for common pump issues.
Guidelines for environmentally friendly disposal of the product.
Diagram and list of pump components for easy identification.
Statement of compliance with European directives and standards.
General| Type | Circulator Pump |
|---|---|
| Model | ecocirc PRO 15-1/65 |
| Weight | 2.4 kg |
| Maximum Operating Pressure | 10 bar |
| EEI | ≤ 0.20 |
| Frequency | 50/60Hz |
| Port-to-port length | 130 mm |
| Protection class | IP44 |
| Insulation class | F |
| Motor Type | ECM (Electronically Commutated Motor) |
| Power Supply | 230V, 50/60Hz |
| Max Head | 6.5 m |
To Next Page