Appendix 1. System Definitions
App1-6
(5) WatchDog timer duration
• This parameter is used to set the maximum allowable execution time of a user program in order to supervisor its normal
or abnormal operation.
• Only one CPU module can be mounted in the GM7U series, therefore, scan watch dog is valid to only the resource 0.
(6) Input Setting
• It’s used to select contact point that will be used for setting input filter or as input pulse catch.
3) Communication parameter
This is a communication parameter to set regular sending/receiving stations, data and cycles to send and receive repeatedly.
(For the detail information about Communication parameter, refer to 7.1.7 “Communication parameter setting”)
(1) Station No.: 0 to 31
(2) Baud Rate: 1200,2400,4800,9600,19200,38400,57600bps.
(3) Data bit: 7 or 8 bits
(4) Parity bit: None, Even, odd
To Next Page
Loading...
