LS Industrial Systems GLOFA G7M-DR60U - Page 125

Chapter 7. Usage of Various Functions
7-18
2) Operation
Narrower width pulse than input correction no. is not considered as input signal
3) Using method
(1) Select ‘Parameter’ window in GMWIN.
(2) Set the filter value in Input Filter Time.
(3) For main unit, the input filter time can be set as a unit of 7 points, but for expansion unit it can be set at a time.
(4) Input filter time is set as default value of 10ms as one of 0,1,2,5,10,20,50,100,200,500,1000ms.
(5) The set on/off delay time for input is applied for all inputs in use.
Input signal
Input image data
In
p
ut si
g
nal
In
p
ut ima
g
e data
time
In
p
ut on/off dela
y
time
(
filter time
)