LS Industrial Systems SV015iC5-1 - Programming Keypad

5. Programming keypad
5-1 SV-iC5
5. Programming Keypad
5.1 Keypad features
Display
FWD Lit during forward run Blinks when a fault occurs
REV Lit during reverse run
7-Segment
(LED Display)
Displays operation status and parameter information
Keys
RUN Used to give a run command
STOP/RST STOP : Stop the operation RST : Reset faults
4-WAY BUTTON Programming keys (UP/Down/Left/Right arrow and Prog/Ent keys)
 UP Used to scroll through codes or increase parameter value
 Down Used to scroll through codes or decrease parameter value
⊳ Left Used to jump to other parameter groups or move a cursor to the left to change the
parameter value
 Right Used to jump to other parameter groups or move cursor to the right to change the
parameter value

Prog/Ent
key
Used to set the parameter value or save the changed parameter value
Potentiometer Used to change the value of run frequency
Display
 FWD/REV LED
 7 Segment LED
Buttons
 RUN
 STOP/RST
 4-WAY BUTTON
 Potentiometer