LS Industrial Systems SV015iC5-1 - Stop Mode Select

9. Basic functions
9-18
SV-iC5
9.6 Stop mode select
 Decel to stop
Group LED Display Parameter Name
Set
Value
Min/Max
Range
Factory
Defaults
Unit
Function
group 1
F4 [Stop mode select] 0 0/2 0
 Set F4 to 0 {Decel to stop}.
 The inverter decelerates to 0Hz for the preset time.
 DC brake to stop
Group LED Display Parameter Name
Set
Value
Min/Max
Range
Factory
Defaults
Unit
Function
group 1
F4 [Stop mode select] 1 0/2 0
 Set F4 to 1 {DC brake to stop} (See page 10-1 for more).
 Free run to stop
Group LED Display Parameter Name
Set
Value
Min/Max
Range
Factory
Defaults
Unit
Function
group 1
F4 [Stop mode select] 2 0/2 0
 Set F4 to 2 {Free run to stop}.
 The inverter turns off the output frequency and voltage when the run command is OFF.
Run
command
Freq.
Decel time
Run
command
Freq, Voltage