LS tractor MT225E - Driving Speed and Ballasting Information

4 -40
4-6. Driving speed
Note) Engine rated speed : 2500 rev/min, Dynamic load radius : 525.5mm (20.7 in.)
Front tire : 7-14 4PR, Rear tire : 11.2-24 8PR
Range
gear
LM H
Main gear 1 2 3 4 1 2 3 4 1 2 3 4
Forward
1.13
(0.71)
1.66
(1.03)
2.15
(1.34)
2.65
(1.65)
3.11
(1.93)
4.53
(2.81)
5.88
(3.65)
7.25
(4.50)
9.50
(5.90)
13.86
(8.61)
17.97
(11.17)
22.16
(13.77)
Reverse
1.09
(0.68)
1.58
(0.98)
2.05
(1.27)
2.53
(1.57)
2.95
(1.83)
4.31
(2.68)
5.59
(3.47)
6.89
(4.28)
9.04
(5.62)
13.18
(8.19)
17.10
(10.62)
21.09
(13.10)
HST Type
Front tire : 7-14 4PR, Rear tire : 11.2-24 8PR
Note) Engine rated speed : 2500 rev/min, Dynamic load radius : 525.5mm (20.7 in.)
Range gear LMH
Forward
0~4.63
(0~2.88)
0~9.47
(0~5.89)
0~21.34
(0~13.26)
Reverse
0~4.63
(0~2.88)
0~9.47
(0~5.89)
0~21.34
(0~13.26)
Mechanical Type
 Driving speed of the tractor or revolution speed of the PTO shaft must be selected appropriately
depending on the type of work, tires or ground conditions. For safety, operate the tractor at a
suitable speed. (Unit : Km/h -> Mile/h)