LS tractor MT225E - Key Switch and Lighting Controls

3 -7
Preheat
OFF
ON
Start
(2) Key switch
 “Preheat” – Engine glow (Cold start aid)
 “OFF” - power off (engine stop)
 “ON” - power on & automatic glow
 “Start” - engine start
 As soon as the engine starts, turn the ignition
key to ON position immediately. If not, it may
cause damage to the starter motor.
Key switch
▶ Because a safety switch for start-up has to be engaged, put PTO switch to “OFF”
position and depress clutch pedal(If fitted) fully and then turn the key switch to
“Start” position. See chapter 4-2-(1), “Engine Start” in this manual.
▶ If the tractor is not in use, the ignition key should be removed.
Caution