5 -55
②
Front turn signal light bulb -
replacement
1. Remove the two screws
①
retaining the turn
signal light lens and remove the lens.
2. Push in on the turn signal light bulb
②
and
rotate bulb counter-clockwise in the socket to
remove the old bulb.
3. Insert the new bulb into the socket and turn it
clockwise until the bulb locks into place.
4. Install lenses and retaining screws.
NOTE: For about bulb specification, refer to the
chapter 5-6-(4) in this manual.
③
Side light bulb - bulb replacement
1. Remove the two screws
①
retaining the taillight
lens and remove the lens.
2. Push in on the side light bulb
②
and rotate
counter-clockwise in the socket to remove the
old bulb.
3. Insert the new bulb into the socket and turn the
bulb in a clockwise direction until tightened.
NOTE: For about bulb specification, refer to the
chapter 5-5-(4) in this manual.
NOTE: Tail light bulb
③
may be not available,
depending on the market.
2
To Next Page
Loading...
