LS tractor MT458 - ESC Speed Up;Down Switch; ESC Mode Select Switch

3 -31
 This switch is used to select an engine speed
cruise control while the ESC is working.
 Two ESC mode is available.
 For cabin models, this switch is installed on the
right-hand cabin pillar.
 For roll bar models, this switch can be installed
optionally on the right lever guide.
 Press the upper or lower side of the switch to
select an engine cruise control mode.
(11) ESC mode select switch
ESC mode select switch
Cabin
 This switch is used to adjust the engine speed
for ESC when the ESC is working.
 For cabin models, this switch is installed on the
right-hand cabin pillar.
 For roll bar models, this switch can be installed
optionally on the right lever guide.
 If pressing the upper/lower side of the switch, the
engine speed will be;
- Upper side: Increased.
- Lower side: Decreased.
(10) ESC speed up/down switch
ESC speed up/down switch
Cabin
ESC mode select switch(optional)
Roll-bar
ESC speed up/down switch
(optional)
Roll-bar