4 -6
▶Release the clutch pedal slowly. If not, the transmission gear life shall be reduced
and it may cause a sudden start.
Notice
Position control
lever
Throttle pedal
Clutch pedal
Throttle lever
Range gear
shift lever
Main gear
shift lever
Parking brake
lever
Creeper gear
lever (if fitted)
4WD lever
F/R shuttle lever
(2) How to drive
① Synchro-shuttle model
1. Lift up all the implements
(front/middle/rear) from the ground
after starting engine.
Main gear shift lever
2. Place the throttle lever to the low
speed position.
3. Depress clutch pedal fully.
4. Place all the transmission gear
levers (Main, Range, Shuttle lever)
on a suitable position.
5. After pressing down the brake
pedals and release the parking
brake lever.
6. Release the clutch pedal slowly
with pressing down the throttle
pedal slowly.
To Next Page
Loading...
