3 -43
④ Down speed control knob (MHL)
It is use to adjust the down speed of the 3-point
linkage. Turn the down-speed control knob to
the right direction for slower down speed, and to
the left direction for faster down speed.
If turning the knob right direction fully, the
implement will be fixed and even if lowering
down the position control lever, the implement
does not let down.
- Tiller work: Slow in down speed.
- Plough work: Fast in down speed.
When working in hard ground, slow down the
down speed to avoid bounding of the implement.
Fast
Slow & Lock
▶When driving on the road, replacing tiller blades or removing grass around the tiller
blades, turn the down-speed control knob clockwise slightly to lock.
▶The knob rotates about two revolutions. Do not over-tighten the knob. It may cause
damage to the control valve and connection parts.
Warning
Down speed control knob
To Next Page
Loading...
