LS SV300iS5-4 - User Manual

I
Thank you for purchasing LS Variable Frequency Drives!
SAFETY INSTRUCTIONS
To prevent injury and property damage, follow these
instructions. Incorrect operation due to ignoring instructions
will cause harm or damage. The seriousness of which is
indicated by the following symbols.
DANGER
WARNING
CAUTION
This symbol indicates the possibility of
death or serious injury
This symbol indicates the possibility of
injury or damage to property
This symbol indicates the instant death or
serious injury if you don’t follow instructions
■ The meaning of each symbol in this manual and on your equipment is as
follows
.
This is the safety alert symbol.
Read and follow instructions carefully to avoid dangerous situation.
This symbol alerts the user to the presence of “dangerous voltage”
inside the product that might cause harm or electric shock.
■ After reading this manual, keep it in the place that the user always can
contact easily.
■ This manual should be given to the person who actually uses the products
and is responsible for their maintenance.

LS SV300iS5-4 Specifications

General

Brand	LS
Model	SV300iS5-4
Category	Controller
Language	English

Summary

SAFETY INSTRUCTIONS

CHAPTER 1 - INSTALLATION

1.2 Environmental Conditions

1.3 Mounting

1.6 Basic Wiring

Illustrates the main power and control circuit wiring.

1.7 Power Terminals

Details the different types of power terminal configurations by HP.

1.8 Control Terminals

Describes the function of various control circuit terminals.

CHAPTER 2 - OPERATION

2.2 LCD Keypad

Explains the function of each button on the LCD keypad.

2.3 7-Segment Keypad

Details the operation of the 7-segment keypad and its components.

2.4 Operation Method

CHAPTER 3 - VARIOUS FUNCTION SETTING & DESCRIPTION

3.1 Function Setting

Explains basic and advanced function parameter settings.

CHAPTER 4 - QUICK-START PROCEDURES

4.1 Operating using keypad

4.2 Operation using Control Terminals

4.3 Operation using Keypad and Control Terminals

CHAPTER 5 - PARAMETER LIST

5.1 Drive Group [DRV]

5.2 Function 1 Group [FU1]

5.3 Function 2 Group [FU2]

5.4 Input;Output Group [I;O]

5.5 External Group [EXT]

5.7 Application Group [APP]

CHAPTER 6 - PARAMETER DESCRIPTION

6.1 Drive group [DRV]

Detailed description of parameters within the Drive Group.

6.2 Function 1 Group [FU1]

Detailed description of parameters within Function 1 Group.

6.3 Function 2 Group [FU2]

Detailed description of parameters within Function 2 Group.

6.4 Input;Output Group [I;O]

Detailed description of parameters within the Input/Output Group.

6.5 External Group [EXT]

6.6 Application Group [APP]

CHAPTER 7 - OPTIONS

7.1 Sub-A board

7.2 Sub-B Board

7.3 Sub-C Board (Isolated)

7.6 DB Resistors

7.7 DB (Dynamic Brake) Unit

CHAPTER 8 - TROUBLESHOOTING & MAINTENANCE

8.1 Fault Display

Lists and describes inverter fault codes and their corresponding protective functions.

8.2 Fault Remedy

Provides causes and remedies for various inverter fault conditions.

8.3 Troubleshooting

Offers a checklist for diagnosing common inverter operational issues.

8.4 How to Check Power Components