LS SV075iS5-4 User Manual

I
Thank you for purchasing LS Variable Frequency Drives!
SAFETY INSTRUCTIONS
To prevent injury and property damage, follow these
instructions. Incorrect operation due to ignoring instructions
will cause harm or damage. The seriousness of which is
indicated by the following symbols.
DANGER
WARNING
CAUTION
This symbol indicates the possibility of
death or serious injury
This symbol indicates the possibility of
injury or damage to property
This symbol indicates the instant death or
serious injury if you don’t follow instructions
■ The meaning of each symbol in this manual and on your equipment is as
follows
.
This is the safety alert symbol.
Read and follow instructions carefully to avoid dangerous situation.
This symbol alerts the user to the presence of “dangerous voltage”
inside the product that might cause harm or electric shock.
■ After reading this manual, keep it in the place that the user always can
contact easily.
■ This manual should be given to the person who actually uses the products
and is responsible for their maintenance.

LS SV075iS5-4 Specifications

General

Rated Current	2.3A
Frequency	50/60Hz
Input Voltage	380-480V
Control Method	V/F Control, Sensorless Vector Control
Communication	RS485 (Modbus RTU)
Output Voltage	3-phase 200V-230VAC
Protection	Overcurrent, Overvoltage, Undervoltage, Overheating
Operating Temperature	-10 to 50°C
Storage Temperature	-20 to 65°C
Humidity	5~95%RH (Non-condensing)
Rated Output Power	750W