EasyManua.ls Logo

LSG Focus M3 - Safety Key Operation and Function; Pulse Sensor Test Procedure; Running Data Display and Setting Parameters

LSG Focus M3
32 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
14
Pull out the safety key and the treadmill will stop quickly. Safety key must be attached to computer to
start the machine.
When holding the pulse sensor handlebars by two hands, the pulse window will show your heartbeat
after 5 seconds. To get the sensor more accurate, test when the machine stops by holding the hand
pulse sensor for more than 30 seconds. The pulse sensor reading is just for reference and is not to be
used as a medical device.
3. SAFETY KEY FUNCTION
4. PULSE SENSOR TEST
5. RUNNING DATA DISPLAY AND SETTING RANGE
INITIAL DATE
INITIAL SETTING
DATE
SET RANGE SHOW RANGE
SPEED(KM/H) 1.0-18KM -------- -------- --------
INCLINE (%) 15% -------- -------- 0—15%
MODE TIME 0:00—99:59 30:00 30:00 5:00---99:00
DISTANCE
0.00km—
99.9km
1.0km -------- 0.5km—99.9km
CALORIES 0Kcl—999Kcl 50kcl -------- 10Kcl—990Kcl
| OPERATION GUIDE

Related product manuals