What to do if my LSG Treadmill shows error E05?
If your LSG Treadmill displays error code E05, it indicates an over current protection issue. This could be due to overloading the treadmill, excessive resistance on the running board (in which case, the running board needs to be oiled), or damage to the motor, requiring a motor replacement.
What to do if my LSG Treadmill displays error E06?
If your LSG Treadmill displays error code E06, it suggests a motor wire connection problem. First, check if the motor connection wire is properly connected. Secondly, inspect the controller for any unusual smells; if there's a peculiar odor, replace the controller.
What to do if my LSG Treadmill shows error E01?
If your LSG Treadmill is showing error E01, it means that the wire from the computer to the bottom control board is not well connected. To solve this: * Check the connection wire between the computer and the control board to ensure it's well connected. * Make sure the IC on the control board is properly inserted; if not, re-insert it. * If the control board has an abnormal power supply, replace it with a new one.
What to do if my LSG Treadmill displays error E02?
If your LSG Treadmill displays error code E02, it is related to protection against exploding. This might be due to a bad contact with the motor open circuit, so change the motor or check the connector. It could also be caused by a punctured power tube, in which case you should change the power tube or the control board.
What to do if my LSG Treadmill displays error E07?
If your LSG Treadmill displays error E07, it indicates a parameter is missing. The suggested solution is to change the control board.
Overview of the treadmill's display console and its functions.
Explains the purpose and operation of the safety key for stopping the treadmill.
Guide on how to use and interpret the pulse sensor readings.
Details on displaying and setting workout parameters like speed and distance.
Table showing programmed speed and incline settings over time intervals.
Instructions for creating and using custom workout programs.
Procedure for conducting a body fat analysis using the treadmill.
Information on connecting the treadmill to devices for music playback.
Recommends stretching and light exercises before starting a workout.
Suggests light jogging/walking and stretching after exercise.
Provides guidance on target heart rate zones for fitness exercise.
Instructions for cleaning the treadmill belt, deck, and motor area.
Advice on checking parts for wear and ensuring tightness of fixings.
Explains the importance and schedule for lubricating treadmill components.
How to determine if the running mat requires lubrication.
Steps to center and adjust the tension of the treadmill running belt.
Details consumer rights regarding product guarantees and failures.
Information on how to make warranty claims and seek support.
To Next Page
General
