THE GS320 SYSTEM
6: LIMITED WARRANTY - APRIL 1
ST
, 2013
6.1 Limited Warranty
LOAD SYSTEMS INTERNATIONAL INC. (hereafter “LSI”)
warrants its products (the “Products”) will be free from defects
in materials and workmanship for a period as determined by
the product family as indicated below (the “Warranty Period”).
warranty duration product family
24 months
GC Series Load Cells, GD
Series Line Riders, GP
Series Load Pins GS001,
GS002, GS003, GS004,
GS005, GS007, GS010,
GS011, GS012, GS020,
GS030, GS031, GS035,
GS050, GS075, GS101,
GS106, GS110, GS112,
GS220, GS221, GS222,
GS224, GS550, GS820,
LP Series Load Pins,
LS051, LS055, PT00100
12 months GS026, GS320, GS375
Unless otherwise specified, the default Warranty Period for the
Products is 12 months after delivery of such product. Please
consult LSI for any Product that is not listed in the above chart
for further details.
The Warranty Period commences after delivery of such
Products to the user (as evidenced on a LSI document)
subject to installation and use in accordance with
specifications described in the LSI Installer and User’s Manual,
as amended from time to time, LSI technical materials and
any related writings published by LSI with respect with such
Products and any applicable industry standards.
During the Warranty Period, LSI or its designated service
representative shall repair, or at its option, replace any Product
that is confirmed to be defective by LSI, in its sole discretion,
in accordance with the Limited Warranty Services Procedures
described in this section.
6.2 Warranty Services Procedures
In order to benefit from this Limited Warranty, the purchaser
must notify LSI’s customer service or LSI’s authorized
distributor or representative originally responsible for the sale of
the Products within 10 days of the occurrence of a suspected
defect in materials or workmanship, and in any case prior to
the expiry of the Warranty Period. Timely notification will permit
the purchaser to obtain a Return Authorization Number which
will indicate return procedures and terms and conditions of
such returns. A proof of purchase of the Product, such as an
invoice or a receipt certifying the validity of the Warranty, must
be presented in order to obtain Limited Warranty coverage. In
any event, even if a Return Authorization Number is provided
to purchaser, LSI reserves the right to inspect the damaged
Product or part before its final decision to repair or replace the
defective Product or part.
The Product or part shall be returned to LSI or its designated
service representative, accompanied by the Return
Authorization Number with prepaid shipping charges. The
purchaser must insure the shipment or accept the risk of loss
or damage during the shipment. Purchaser shall also pay any
tariff or duty applicable to the return of the defective part or
Product. LSI will, at its option, repair or replace the Product or
part returned to LSI or to its designated service representative.
LSI owns all parts or Products replaced, repaired or removed
from a repaired Product. If LSI repairs a Product, the Product
Warranty coverage Period is not extended and the Limited
Warranty shall expire as if uninterrupted at the end of the last
month of the original Warranty Period from shipping from LSI.
If LSI replaces a Product, the replaced Product is warranted
for the remainder of the original term or sixty consecutive (60)
days, whichever is longer.
LSI reserves the right to require from the user or owner of
the Products, prior to determining if the Limited Warranty
coverage is applicable, that LSI receive the data logging
equipment used with the Products and that LSI be authorized
to retrieve all information from such data logging equipment
in order to, among others, ensure that the written instructions
and applicable standards, including safety margins, were
respected and not exceeded during Product use. Failure by
the owner or user of the Product to supply such information
shall be deemed a material default of the terms and
conditions of this Limited Warranty and shall be irrevocably
construed as evidence that the Product was misused or
abused. Consequently LSI shall irrevocably be relieved of any
obligations to compensate the user or owner of the Product
for any and all damages resulting from Product failures when
data logging equipment, and access to its content, cannot be
freely and readily provided, unhampered, to LSI.
LSI will pay ground freight transportation costs of replacement
or repaired parts or Products to the destination in the countries
in which it maintains a service center (currently Canada,
continental United States of America, United Kingdom,
Australia and the United Arab Emirates) (the “Territory”). LSI will
not pay any transportation costs of replacement or repaired
parts to a destination outside of the Territory. Shipping and
handling costs to locations outside the Territory shall be the
responsibility of and borne by Purchaser or Owner of the
Product prior to any shipment by LSI. (Contact LSI to obtain a
Return Authorization Number and the address to ship parts).
6.3 Exclusion of Other Warranties
THE ABOVE WARRANTY IS THE SOLE WARRANTY
APPLICABLE AND THERE ARE NO EXPRESS, LEGAL OR
IMPLIED WARRANTIES OR CONDITIONS IN RELATION TO
ANY PRODUCTS INCLUDING ANY IMPLIED WARRANTY OR
CONDITION OF MERCHANTABILITY, NON-INFRINGEMENT
SkyAzúl, Equipment Solutions
To Next Page
Loading...
Need help?
General