LSLIDAR M10P - Specifications

M10P
2
the detecting distance, based on the combination of the distance value
calculated in real-time by the signal processing unit embedded in the M10P and
the angle information output by the highly accurate self-adjusted angle
measuring module.
Figure 1.2 Demonstration of Ranging Function
*Note: The figures only demonstrate the function of the distance measuring
system. They are not proportional.
1.3 Specifications
Table 1.1 Specifications of M10P
Model
M10P
scanning angle
360°
PRF
20 KHz
Data Generating Rate
20,000 pts/sec
Angular Resolution
0.22°
Scanning Rate
12 Hz
Measurement
Accuracy
±3 cm
Output Data
Resolution
1 mm
Wavelength
905 nm
Laser Safety Level
CLASS I
Detection Range
10 m @10%
Data Content
Azimuth, Distance, High Reflector Recognition
Network Power
Supply
5 V ~ 15 VDC
Operating
Temperature
-10 ~ 50
Noise
Starting-up: <60 dB, Operating:<50dB
Motor
Built-in Brushless Motor
Communication
Interface
Standard Serial Port (Baud Rate: 512000 bps)
Shock Test
500 m/sec², lasting for 11 ms