Network Video Recorder User Manual
18
registered to the ISUP platform. It cannot be empty, or "ABCDEF".
5. Click Apply to save the settings and restart the device.
What to do next
You can see the registration status (online or offline) after the device is restarted.
1.5.2 Configure LTS Connect
LTS Connect enables the mobile phone application and the service platform page
(dev.guardingvision.com) to access and manage your connected NVR, providing a convenient
remote access to the video security system.
Steps
1. Go to System → Network → Advanced → Platform Access.
2. Check Enable to activate the function. Then the service terms will pop up.
1) Enter Verification Code.
2) Scan the QR code to read the service terms and privacy statement.
3) Check The LTS Connect service will require Internet access. Please read Service Terms and
Privacy Statement before enabling the service if you agree with the service terms and
privacy statement.
4) Click OK.
Note
● LTS Connect is disabled by default.
● The verification code is empty by default. It must contain 6 to 12 letters or numbers, and it is
case sensitive.
● Check Time Sync, and the device will sync time with LTS Connect instead of NTP server.
3. Optional: Configure following parameters.
● Check Custom and enter Server Address as your desire.
● Check Enable Stream Encryption, then verification code is required for remote access and
live view.
4. Bind your device with a LTS Connect account.
1) Use a smart phone to scan the QR code on the device to download LTS Connect.
2) Use LTS Connect to scan the device QR, and bind the device.
Note
If the device is already bound with an account, you can click Unbind to unbind with the
current account.
5. Click Apply.
What to do next
You can access and manage your video recorder through LTS Connect app or
To Next Page
Loading...
