Network Video Recorder User Manual
76
Make sure the connected IP camera supports the PTZ function and is properly connected.
Purpose
You can operate the auxiliary functions including light, wiper, 3D positioning, and center on the PTZ
control panel.
Step 1 Click on the quick settings toolbar of the PTZ camera’s Live View.
Step 2 The PTZ control panel displays on the right of the interface.
Step 3 Click Aux Function.
Figure 6-14 Aux Function Configuration
Step 4 Click the icons to operate the aux functions. See the table for the icon descriptions.
Table 6-1 Description of Aux Functions Icons
To Next Page
Loading...
