LuCell LU-3000 - Opening Door with Fingerprints; Deleting Fingerprints

User Manual
│
9
Opening Door with Fingerprints
Deleting Fingerprint
1
2
※ To delete all fingerprints at once, press password change button once for a
short time instead of fingerprint Id number.
1. Press START button and place registered finger on fingerprint recognizer.
2. Pull safe door to open.
- Display will show ‘OPEn’ once door is open.
1. Press password change button inside door for 3 seconds until LCD displays“SEt.”
2. Press password change button again for a short time.
“FingEr” will be displayed on LCD along with voice sound of “Fingerprint set up.”
3. Press 1 and select fingerprint number to be deleted and press START button.
‘dEL_number’ will be displayed on LCD
4. Press START button to finish.
1 2 3 3 4
1 2