Lucent Technologies 6400 Series User Manual

29
continued on next page
Inspect
The Inspect (display) feature shows you call-related information for an
incoming call when you are already active on a call.
To see who is on hold while on a call
1. Press the Menu button and then press the softkey below Inspt
OR, if Inspt is not available on your display,
press the button (if administered).
2. Press the call appearance button of the held call.
Information is shown on the display screen;
you remain connected to the present call
3. To return to the held call, press the Exit button and then the call
appearance button of the held call.
Message Retrieval
The Message Retrieval (display) feature allows you to retrieve messages
left for you when your Message light is on. This feature will also let you
retrieve messages for other telephones not equipped with a display (if you
are authorized as a system-wide message retriever by your system
manager).
To see your messages when your Message light is on (while on-hook,
off-hook, or on a call)
1. Press the button (if administered).
2. Press the Next button to see the first message (and then for each
following message).
To return a call to the message sender
1. Pick up the handset.
2. Press the button while any part of the message is shown.
Note: You can also leave your handset on-hook. The speakerphone
will turn on automatically when you press .
To erase a message
1. Press the button (if administered) while any part of the
message is shown.
Inspect
Msg Rtrv
Call Disp
Call Disp
Delete

Lucent Technologies 6400 Series Specifications

General

Brand	Lucent Technologies
Model	6400 Series
Category	Telephone
Language	English