Lucent Technologies 6402 User Manual

24
FIGURE 9 Removing the Tray from the Base of the Telephone
Installing the Telephone Number Card
At the front of this user’s manual is a page on which there are designation
cards for the 6400-Series multi-line telephones and a separate telephone
number card (labeled Tel No.) for the 6402 and 6402D. On this telephone
number card you can write your telephone number or extension.
To label and install the telephone number card on your 6402 or 6402D
telephone
1. Print your phone number or extension on the Tel. no. card.
2. Crease the perforated edges of the station number card and separate
the telephone number card along the perforations.
3. Remove the telephone number card cover (located above ,
, and ) by applying pressure toward the other end of
the cover. See Figure 9.
4. Place the completed telephone number card into the number card
holder, the area from which you removed the telephone number card
cover.
5. Replace the telephone number card cover by inserting one end into its
slot.Then,slightly flex the plastic and slip the other end into its slot.
Speaker
Feature Hold

Lucent Technologies 6402 Specifications

General

Brand	Lucent Technologies
Model	6402
Category	Telephone
Language	English