Lucent Technologies 6402 User Manual

27
Line and Feature Button Lights
Feedback Tones (continued)
Tones Meaning
coverage One short burst of tone; indicates your call
will be sent to another extension to be
answered by a covering user.
dial A continuous tone; indicates dialing can
begin.
intercept/
time-out
An alternating high and low tone; indicates
a dialing error, a denial of the service
requested, or a failure to dial within a
preset interval (usually 10 seconds) after
lifting the handset or dialing the previous
digit.
recall dial Three short bursts of tone followed by a
steady dial tone; indicates the feature
request has been accepted and dialing
can begin.
reorder A fast busy tone repeated 120 times a
minute; indicates all trunks are busy.
ringback A low-pitched tone repeated 15 times a
minute; indicates the number dialed is
being called.
Line and Feature Button Lights
Light Meaning
Steady red light next to
and next to
The red light next to
lets you
know that the dial pad is now in
Feature selection mode. The red light
next to means that the
one-way speaker is on.
Blinking red light next to You have put a call on hold. In order to
return to the call, press and then
release the switchhook.
Feature
Speaker
Feature
Speaker
Hold

Lucent Technologies 6402 Specifications

General

Brand	Lucent Technologies
Model	6402
Category	Telephone
Language	English