Operating Instructions
The unit is to be properly assembled
in accordance with the Installation
Instructions before it is used.
Charging the Vehicle
DANGER: RISK OF FIRE OR
EXPLOSION
WARNING: RISK OF ELECTRIC
SHOCK
Do not use if the equipment is damaged.
Always inspect all parts of the equipment
before installing or using. Installing or
using damaged equipment can increase
risk of electrical shock or fire.
CAUTION: RISK OF PERSONAL
INJURY
CAUTION: RISK OF DAMAGE TO THE
EQUIPMENT
Always store the equipment properly and
only use the equipment within the scope
of service conditions. Misuse such as
dropping, immersion, etc., may cause
damage and could result in injury or
death to anyone nearby.
Plugging In
Follow these steps to ensure proper
charging of your Lucid vehicle.
DANGER: RISK OF FIRE OR
EXPLOSION
WARNING: RISK OF ELECTRIC
SHOCK
Do not use extension cables, a multi-
outlet adaptor, a multi-plug, a conversion
plug, or a power strip. Using these items
can cause damage to the equipment and
increase the risk of electric shock or fire.
WARNING: RISK OF ELECTRIC
SHOCK
Connect only to properly grounded
outlets. Improper connection can cause
electric shock and damage to the
electrical outlet and equipment. Check
with a licensed electrician or serviceman
if there is doubt that the product is
properly grounded.
1. Ensure that the adaptor plugged
into the Mobile Charging Cable
matches the outlet you want to use.
2. Plug the Mobile Charging Cable
plug head into the power outlet.
The adaptor should be inserted
completely into the power outlet.
The Lucid logo on the control box
should light up with a white light
to indicate the unit is powered and
ready. Wait 3 seconds to confirm
the logo does not begin flashing
red. If it remains white, proceed to
step 3.
3. With your vehicle unlocked, press
the charge port door to open it.
4. Press the Connector latch button,
and plug the Mobile Charging
Cable Connector into your vehicle's
charge port.
5. When you plug the Mobile
Charging Cable into your vehicle,
the Lucid logo on the control box
and the charge port light will pulse
white to indicate charging.
Unplugging
When charging is complete, the light
stops pulsing and turns solid white. You
can then safely unplug the vehicle using
these steps.
1. With the vehicle unlocked, press
the Connector Latch Button and
then pull the Connector out of the
charge port.
Charging 12
To Next Page
Loading...