Model 26-1 Frisker User’s Manual Section 4
Ludlum Measurements, Inc. Page 4-2 April 2017
Both filters snap on across the face of any Model 26-1 frisker whenever these
type of measurements are desired. The filters are then again easily removed to
continue on with measuring contamination (cpm or Bq).
Filters can be purchased separately from the instrument or together with a new
Model 26-1. (Exposure Filter is part LMI # 4498-334, Ambient Dose
Equivalent Filter is LMI part # 2002-1050.) The dose filter supplies a filter
while the exposure filter comes in a kit that provides the filter plus a replacement
detector protective screen that can easily be changed out.
0
To Next Page
Loading...
Need help?
General
