Model 26-1 Frisker User’s Manual Section 6
Ludlum Measurements, Inc. Page 6-2 April 2017
The “crossed-out wheelie bin” symbol notifies the consumer that the
product is not to be mixed with unsorted municipal waste when discarding.
Each material must be separated. The symbol is placed on the label located
on the side panel. See section 8, “Recycling,” for further information.
The “CE” mark is used to identify this instrument as being acceptable for
use within the European Union.
Cleaning and Maintenance Precautions
The Model 26-1 may be cleaned externally with a damp cloth, using only
water as the wetting agent. Observe the following precautions when
cleaning or performing maintenance on the instrument:
1. Turn the instrument
OFF
and remove the batteries.
2. Allow the instrument to sit for one minute before cleaning the
exterior or accessing any internal components for maintenance.
To Next Page
Loading...
Need help?
General
