LUDLUM 26-1 User Manual

Model 26-1 Frisker User’s Manual Section 5
Ludlum Measurements, Inc. Page 5-2 April 2017
Default Setup Values
Setup Parameter Default Value Notes
Calibration Constant 3.30 kcpm per mR/h
Dead Time Correction 75 Microseconds
Efficiency 15.0 Efficiency %
Primary Units cpm Counts per minute
Primary Units RATE/ MAX
Mode Alarm Point
000 Disabled
Primary Count Units c Counts
Primary Count Alarm Point 000 Disabled
Secondary Units mR/h Non-SI exposure rate
Secondary Units RATE/ MAX
Mode Alarm Point
000 Disabled
Secondary Count Units mR Non-SI exposure
Secondary Count Alarm Point 000 Disabled
Response Time 0 Enable Auto Response
Auto-Response Rate F Fast Auto Response
Operational Modes 0 All Modes Available
Count Time 1:00 One Minute
Low Light Threshold 55

LUDLUM 26-1 Specifications

General

Brand	LUDLUM
Model	26-1
Category	Measuring Instruments
Language	English