Model 26-1 Frisker User’s Manual Section 8
Ludlum Measurements, Inc. Page 8-1 April 2017
Recycling
Ludlum Measurements, Inc. supports the recycling of the electronics
products it produces for the purpose of protecting the environment and to
comply with all regional, national, and international agencies that promote
economically and environmentally sustainable recycling systems. To this end,
Ludlum Measurements, Inc. strives to supply the consumer of its goods with
information regarding reuse and recycling of the many different types of
materials used in its products. With many different agencies – public and
private – involved in this pursuit, it becomes evident that a myriad of
methods can be used in the process of recycling. Therefore, Ludlum
Measurements, Inc. does not suggest one particular method over another, but
simply desires to inform its consumers of the range of recyclable materials
present in its products, so that the user will have flexibility in following all
local and federal laws.
The following types of recyclable materials are present in Ludlum
Measurements, Inc. electronics products, and should be recycled separately.
The list is not all-inclusive, nor does it suggest that all materials are present in
each piece of equipment:
Batteries Glass Aluminum and Stainless Steel
Circuit Boards Plastics Liquid Crystal Display (LCD)
Ludlum Measurements, Inc. products that have been placed on the market
after August 13, 2005, have been labeled with a symbol recognized
internationally as the “crossed-out wheelie bin,” which notifies the consumer
that the product is not to be mixed with unsorted municipal waste when
discarding. Each material must be separated. On the Model 26-1, the symbol
will be placed on the serial number label located on the side of the
instrument.
The symbol appears as such:
Sectio
8
To Next Page
Loading...
Need help?
General
