Lufft XA1000 User Manual

GB Operating manual – multifunction measuring meter XA1000 / XP200 / XP400 • 08_2015 22
Archive, fig. B.:
Archive, fig. C.:
B.
87
88
89
87 Opens the selected archive entry (see fig. C.).
88 Deletes the selected archive entry.  A safety prompt opens.
Confirm it by pressing the "OK" key if you want to delete the
entry. Otherwise, touch the "Cancel" key.
89 Closes fig. B. and returns to fig. A. ("Archive" screen,
page 21).
C.
90
91
90 Charts (top of fig. C.) and tabulates (bottom of fig. C.) the
measured values.
You can select one of the three different measurement
channels using the "Up" and "Down" keys on the cross control
until. The selected measurement channel will be highlighted in
the table.
Displayed in the table are the minimum value (MIN), the
maximum value (MAX), the arithmetic average (∅) and the
standard deviation (SD).
In case the data won't fit onto one table page after a longer
recording session, you can browse through the timeline ([s],
on the right in fig. C.) by using the "Left" and "Right" keys on
the cross control unit.
91 Closes the selected archive entry and returns to fig. A.
("Archive" screen, page 21).

Lufft XA1000 Specifications

General

Brand	Lufft
Model	XA1000
Category	Measuring Instruments
Language	English